5 Maintenance Tips for the Longevity of the Trailers

Proper maintenance of trailer parts is the most important thing after you are done with the setting up of the trailer. You should never treat these as an afterthought as it is only through them that your boat or truck becomes roadworthy. One more thing that you should keep in mind is that you should not compare driving you car or truck with that of towing this. The following are some of the tips just to ensure that these always remain in the top condition.

• Inspect suspension – You should check the suspensions properly. You can look for the wears and wears and tears of heat cracks on the air springs. You should properly see if anything is interfering with the movement. Apart from that, you should also see to it whether the air springs have sufficient air pressure.

• Check tire – The tires are one of the major expenses and that is why you must take good care of the same. Adequate air pressure is the key to the longevity of the tires. The drivers get very busy when they are out on the road. That is why you should opt for tire pressure monitoring while the vehicle is not being used. This will make sure that the tire pressure remains adequate whenever you are preparing to go out. You should also check the auxiliary power fuse, whether the system pressure is set correctly or not and the position of the system shut-off valve.

• Always be careful about the brakes – Taking proper care of the brakes is absolutely necessary as this is one of the major parts that if fails to work correctly can be fatal. Try To measure the drums just to make sure that there is enough left for the next time you hit the road.

• Lubrication is a must – The correct lubrication is essential for the proper operation of this. Grease mainly is of three types. These performance rating, thickening systems, as well as the grade, all play a significant part in selecting the right grease. Purge the old grease with the new one in the proper manner so that the parts can work correctly.

• Lighting it up is essential – Light that does not operate is the red flag for inviting someone for a roadside inspection. Corrosion is the staunchest enemy of any vehicle. So you should put a close eye on the lamps, the harness systems and the wires. You should put regular grease on the points of any link for the proper mobility of the vehicle.

The author Dylan Flint owns a trailer and has written extensively on how to take care of the trailer parts properly including the jockey wheels and the couplings so that you can use the same trailer for years together.

 

The 3 Most Important Tips for Keeping Your Tires in Top Shape

Tires are considered one of the most important components of a car, and their upkeep is not only a major part of car maintenance, but also part of driver and passenger safety. However, wheels are also susceptible to premature damage and wear, so it’s important to consider a few maintenance tips to keep them in good shape for a long time. Drivers should inspect them regularly for adequate air pressure. An inexpensive rotation can help to maintain tread wear and promote the maximum amount of life. And drivers should also consider that their driving habits may have an impact on the long-term quality of their wheels.

Inspect Air Pressure Regularly

Optimal tire inflation is crucial for achieving longevity and top performance. Also, optimal inflation can help with fuel efficiency. According to the U.S. Department of Energy, an adequate amount of air pressure can improve fuel economy by 3.3 percent.

Experts recommend inspecting air pressure at least once per month and before and after long road trips. A driver should also apply the recommended amount of pressure instead of the maximum amount. If the wheels are underinflated, they’re at risk for irregular wear and require more energy and fuel for the vehicle, as they don’t roll as smoothly and must work harder on the road to compensate. If they are overinflated, it will lead to a harsh driving experience and reduced traction.

Not only is regular inspection beneficial for car maintenance, but it’s also an important part of car and driver safety. According to studies by the National Highway Traffic Safety Administration, underinflated tires are the leading cause of tire-related crashes.

Rotation

According to Michelin, drivers should get their tires rotated every 6,000-8,000 miles. Some shops may provide a free rotation when a driver buys their tires all at once; if they don’t, drivers needn’t worry, as this service is usually inexpensive and worth the investment. A person who is mechanically inclined can even perform this task at home with the purchase and use of a hydraulic floor jack.

Many car experts and mechanics would agree that rotation is needed to ensure more uniform tread wear, as wheels tend to wear in different places depending on where they are situated on the car. This will guarantee more consistent performance of the vehicle, and a driver will also get the most out of the wheels’ lives.

Consider Driving and Parking Habits

Many people may forget the main thing they do in a car that determines the integrity of a tire: yes, driving. Not only can being a good driver prevent road accidents and save lives, but it can also help to reduce tread wear and promote longevity of those rubbery wheels.

Since tires are in direct contact with the road, they deal with a tremendous amount of abuse when a person engages in risky driving habits. So if a person doesn’t want to wear out the tread too soon, they can limit the amount of “bad” driving habits such as aggressive driving, speeding, and hard braking.

Drivers should also be mindful of what’s on the road and in parking lots and driveways when they park their vehicles; treads are very susceptible to tears from broken glass, nails, and potholes. For extra measure, a person may also inspect for sharp debris in the treads every once in a while.

 

4 Tips To Do Auto Repair On Your Own

Have you determined yet that you just wish to handle your automobile repair on your own? If you have decided, then it’s time to organize yourself before you begin working on your car.

Here are top 4 tips for DIY auto repair of some common issues that you just can fix on your own.

  • How To Do Rust Repair

Managing automobile rust repair is not quite difficult. You’ll simply remove rust from an automobile by scrubbing it employing a wire brush. Once you are finished doing that, you should wash the automobile paint by using recommended sandpaper, and this will be enough to get rid of the paint and the primer. Then, a metal grinding wheel should be used to grind the scrubbed elements of your automobile.

Try this slowly in order to avoid any damage to your automobile. Then, you need to clean your automobile employing a piece of soft cloth and properly cover the areas wherever you do not want to apply paint. Spray on some primer and let it dry, then repeat this once more and paint afterward. Let the paint dry and apply two to three coats over it.

  • How To Do Scratch Repair

When you are dealing with this sort of problem, then you’ll be requiring some sort of guidance. You should begin this with an automobile wash and then wipe the vehicle dry and find out the scratches clearly. Once you see all the scratches clearly, touch them properly so you can establish whether or not they are scratches or simply discoloured paint.

Using high quality sandpaper, clean the area and level the scratch then use a soft piece of cloth to clean that specific area. Apply a recommended compound on the scratch employing a cutter. Allow it to become hard and the use sandpaper, level it up and clean the area. Remove the dirt and spray primer on it, and once the primer dries, conclude with touch-up paint.

  • How To Do Window Repair

Windows of an automobile can get stuck for a variety of reasons. Using a duster, you can remove all the dust and debris stuck in the window panels. If the windows are stuck, then there might be some problem with the circuit. Check the circuit and change it if you see any damage in it.

  • How To Repair Overheated Engine

If your automobile’s engine becomes overheated when you are driving it, park it at a safe place immediately. Then, flip the heater setting and heater blower high. Allow the engine to cool down by opening the hood. Until the engine cools down, do not open the radiator in order to avoid accidents and burns. Pour some coolant in the engine once it becomes cool.

 

Top 6 Tips For Car Dent Repairing

There are a variety of ways to remove a dent from your car. However, first you need to closely analyze the dent before you either use paint less dent repair or typical repair. After you have decided what technique you are going to utilize for the dent the automobile must be made ready before removing it. A variety of steps you would like to follow before getting rid of a dent in the best manner.

Here are some of the top tips that will help you to remove all types of car dent easily.

  • Tip #1: Wash The Automobile

The first step you must do is to scrub the automobile. However, ensure to use dish laundry soap instead of using regular automobile soap. The explanation for this can be the very fact that the majority automobile soaps out there leave behind some wax and silicone which makes dent removal tough. The concept is to remove all that wax off so no matter which technique you utilize your tools & equipment doesn’t slip.

  • Tip #2: Get Rid Of All Grease And Wax

By using a common grease remover, wax and grease should be completely removed from the spot. There are various grease removers you’ll be able to use. As an alternative some lemon juice and hot water can also assist to get rid of grease.

  • Tip #3: Finding The Correct Tools & Equipment

Before you’ll be able to repair a dent you may get to collect the right tools. If either side of the dent is accessible, then you’ll be able to use a dolly and hammer. If you’re able to solely access one side then use a stud welding gun which can be bought from most of the hardware stores.

  • Tip #4: The Best Rule Of Removing Car Dent

Use the first to the last rule. This suggests that you need to start from repairing the first dent and then work your way to the last dent. Thus primarily you would follow the same sequence in which your automobile took dents.

  • Tip #5: Heat Shrinking

Heat shrinking is employed to mainly shrink the metal a bit. You’ll be able to shrink any metal by employing a few ice cubes with a shrinking hammer. In some cases you may got to use the heat technique that expands the metal by employing a torch and shrinking it quickly utilizing ice to remove tiny dents. Remember, applying the blow torch for extended time periods than required might harm the paint and the metal.

  • Tip #6: Filler

After straightening the metal use some body filler. Body filler should be applied to the steel or metal directly, and then the old coating is removed.

 

5 Benefits Of Changing Your Car’s Air Filters

If you have a car, it’s recommended that you change the air filter regularly. Here are some of the benefits of doing so:

You increase your car’s performance

Dirty car filters reduce the amount of air that flows into the car’s engine. When the amount of air in the engine is limited, the car doesn’t spend the amount that it’s supposed to and as a result, its performance goes down. Studies have consistently shown that cars with clean filters are by far more effective than those with dirty filters.

You protect your car from damage

Filters prevent foreign particles from getting access to the inside of the car’s engine. Even when a small particle gets into the engine it can cause a lot of damage to the moving parts. The damage gets worse as more particles get into the engine. A clean car filter traps all the air debris ensuring that none gets into the engine. This protects your car from damage. Since the car and the engine aren’t damaged, they last for a long time.

You increase the efficiency of the car

Studies by experts show that clean car filters increase the car’s efficiency by up to 14%. The reason for this is because there is plenty of clean air in the engine thus the car doesn’t strain burning fuel. Due to the efficiency, you spend less money than when the car is running on a dirty air filter.

You reduce car emissions

Dirty filters reduce air flow to the engine thus affecting emission control systems. Faulty emission control systems result to an incorrect air-fuel mixture. When the fuel mixture is too much, it can result in engine deposits resulting to a lot of emissions. In addition to the high emissions, it’s also common for the car to consume more fuel than it should.

Changing the car filter

As you have seen, there are plenty of benefits that come with replacing your car filter. The cool thing with air filter replacement is that you can do it on your own. When replacing the filters, ensure that you replace them with identical ones designed for the exact match and model of car. Car filters come in different shapes, designs, and sizes; therefore, you should first remove the one in the car and buy a similar one that resembles it. For ideal results, ensure that you buy from a reputable store.

 

5 Signs You Need An Expert For Automobile Repair

Automobiles are turning into more advanced and complex since the last decade. With the arrival of electrical car technologies, with electronic fuel injection system and controlled systems, the automobiles have changed dramatically from what they used to be a few decades ago! The variety of cars which can get minor car repairs done by newbie mechanics is shrinking rapidly.

Let’s take a look at some signs that it’s time to take your automobile to an automobile repair store to avoid troubles and expensive repairs in the future.

  • The Automobile Is Less Than 10 Years Old

Automobiles that are newer than 10 years typically have really advanced systems. Even automobile repairs such as battery or a fuse changing, brakes replacement and common automobile service process can cause other parts of the system to operate if the right techniques are not followed.

  • The Repair You Are Planning Is Not In The New Car Handbook

If the car company is not advising you to try and do it yourself, it’s most likely safest not to try any repairs. If you are doubtful, it will be a better decision to call an auto mechanic to have a look at the problem first. Auto mechanic will advise you on safety points to keep in mind, if it’s seemingly that you will have to be compelled to create the fix again more in the future.

  • If There’s A Need To Remove Something Out Of The Automobile

Safety may be a serious issue while the repair is going on, so you need to be extra careful while doing automobile repair. While removing some heavy part out of the automobile, you are risking other parts of the automobile and yourself. It’s advised that you simply hire professional auto mechanic to perform this type of tasks.

  • The Automobile Repair Needs Equipment You Do Not Own In Your Garage

Contrary to common belief, not each automobile repair job will be finished by just using a shifter and sticky tape. If you do not have the right equipment to try and do the repairs yourself, the value in shopping for that tool/equipment usually outweighs the savings you were planning to make.

  • Your Automobile Comes With An Electronic Fuel Injection System

If your automobile has an electronic fuel injection system (and in several cases, this is often sealed in huge letters right the top, or at the side of the series name somewhere on the car body), it’s not safe to perform the repair job by yourself. Even car repairs which are not associated with the timing may throw the PC out, and might cost you a lot more money to repair at the mechanic’s than it might have cost originally.

 

Top Tips For Hiring The Best Car Mechanic

We all have been at least once in a situation where we have had vehicle trouble and required somebody to repair our car. Most folks have at one point of time been in such situations, and it’s often extraordinarily frustrating to get your car fixed however with no knowledge on who to call to get it fixed!

That is why it is important once you get an automotive vehicle to seek out a car mechanic in your neighbourhood that you could simply trust. Selecting a car mechanic before you truly want one may be a good way to assist you from making an emergency call that may cause wastage of more time and money.

  • Ask For Recommendations

Most of the experts agree with this tip – ask for recommendations while you are in the process of selecting a car mechanic. Remember that car mechanics perform in the service industry, and they are not solely there to repair your car, but to provide an overall service, which implies that you simply ought to confirm that the mechanic not solely is aware of the ways to repair cars, but also knows the way to treat his customers.

Of course, the best way to understand this as expected is to ask for recommendations before you visit a car mechanic garage. Your friends and family members, or maybe co-workers can help you find the mechanics with whom they have worked with before, and you may possibly notice that they good advice to give on what mechanic you ought to use and which of them you ought to avoid.

  • Visit Their Mechanic Shop

Do you think that every mechanic shop is same? Of course not! Most of us think that garages are filled with filth and are extraordinarily unorganized, which isn’t true. While you are attempting to pick a car mechanic garage, confirm that you simply take the time to visit their mechanic shop. If the mechanic shop is totally filthy and is actually unorganized, then you will wish to go to some other mechanic shop.

No doubt, some amount of dirt and grease is anticipated in a mechanic shop, the garage ought to be organized in order that the car mechanic will notice everything that he wants, and there ought to even be a clean and comfy waiting place for you to take a seat and wait in case the car is going to take a bit more time to get repaired.

  • Cost Of Repair

One more factor which is important to see while you are selecting a car mechanic is their price for car repairs. While you’re looking for a car mechanic don’t consider cost as the deciding factor. In fact focus more on the skills and experience of the mechanic.

 

How To Prepare Your Vehicle for Summer Season

Auto maintenance is a never-ending chore, but much of its proverbial sting can be removed with some advance planning, especially around seasonal changes that can place huge stresses and strains on a vehicle. Extremes of heat, and/or humidity can play havoc with an unprepared vehicle, so if you are facing a hot, humid summer, here is how to prepare your vehicle for the ordeal.

Change the oil

You have probably heard this a million times before, but this particular point ears repeating, especially if you live in a climate with harsh winter conditions. Oil designed for cold weather use cannot provide proper lubrication in hot weather because it thins out too much. Replace the oil with the grade recommended for summer use, and don’t forget to replace the filter as well.

If your wallet can stand the extra strain, replace the oil with fully synthetic oil, even if it is not specifically recommended by the manufacturer of your vehicle. Synthetic oil remains stable under a wider range of temperatures than regular mineral oil, with the added bonus that it provides almost twice the lubrication of mineral oil, which is good for any engine, and especially older, high mileage engines.

Replace the engine coolant

You have no doubt heard this a million times before as well, but proper auto maintenance requires that the engine coolant be replaced at least once a year. Apart from lowering the boiling point of water, the correct concentration of anti-freeze also prevents the corrosion of aluminum engine parts and components, which can cause serious issues, including engine failure.

Internal corrosion can open up leak paths through which coolant can be lost either to the outside of the engine, or into cylinders where it interferes with the combustion process. Coolant can also leak into the engine oil, with potentially disastrous results if the problem is not caught and resolved in time.

However, always follow the manufacturer’s recommendations regarding the amount of anti-freeze to add to the cooling system. Too much is as bad as too little; too much anti-freeze actually lowers the boiling point of water, meaning that your engine can overheat even though you have just replaced the coolant.

Check the battery

Hot, humid conditions kill more car batteries than even the coldest winters, so cut down on unexpected auto maintenance and maintenance costs by ensuring that your battery is up to the demands of summer conditions. Even marginally defective batteries can cause all manner of electrical issues, such as sporadic or unexpected trouble with alarm/security/anti-theft systems, low fuel pressure, difficult starting, or even rough idling, and/or rough running- among others.

Have the battery tested at a specialist battery dealer, and check that it can deliver the required cranking amps. Replace the battery if there is even the slightest doubt about its condition.

Remove road salt

If you live in an area where the roads are treated with salt during winter, be sure to have all salt deposits removed from the wheel wells and other places where slush tends to collect. Salt is highly corrosive, and not removing it will definitely cause rust and corrosion to set in. Once corrosion sets in, it may be impossible to stop or remove, so be sure to have all traces of salt removed as soon as the weather improves.

Check tires and tire pressures

Proper auto maintenance includes checking the condition and inflation of all tires, including the spare wheel. Tire pressure is as important as tire tread depth, so as soon as the weather improves, adjust the pressure in the tires to allow for heat expansion. High ambient temperatures and hot road surfaces can cause the air in a tire to expand, which can increase the pressure inside the tire by as much as 15% or more.

Never rely on the tire pressure monitoring system to warn you of under inflated tires. These systems are notoriously inaccurate, and a tire can be under inflated by as much as 25% before an alarm or warning light is triggered. Use a good quality digital tire pressure gauge to check your tire pressures at least once a week to maintain tire pressures at the recommended level.

Check the A/C system

In some climates, proper auto maintenance involves ensuring that the air conditioning system is fully functional, so avoid the rush and have your A/C system checked out before summer really sets in. Listen out for any unusual noises, sounds, or odors coming from the system, and have all faults repaired before a minor issue becomes a huge problem.

The best way to maintain an air conditioning system is to use it- even in the depths of winter. This not only keeps all the moving parts in the compressor lubricated, but it also largely prevents micro organisms from establishing colonies in the system’s ducting. So if you have not used the A/C system during the past winter and it now gives of an odor that smells like something had died in it, you have an unwelcome growth of bacteria, mold, and/or fungi in the system.

Remove the colony (and its odor) by spraying an approved disinfectant into the system, or have it done, because if you don’t, the smell could get so bad that it might become impossible to remove it from the car. Worse though, not treating this problem could cause serious respiratory problems in children, elderly persons, and/or persons with compromised immune systems.

At Prestige Auto Tech we are a group of professionals who share a common goal: Customer Satisfaction. We pride ourselves in that we strive to be the best in what we do and expect nothing less.

 

Small Automotive Repair Shops

The car lift in many shops can be extremely costly, however is going to give you various advantages that without a doubt will make it worth your time. To begin, a car lift will make a car shop much more secure for the representatives, give accommodation when you are taking a shot at vehicles, furthermore help you with situating to make the repairing of autos much less demanding generally speaking. In the event that you experience considerable difficulties certain territories inside the motor, a car lift can truly help you.

Security

The most essential thing when working in a car shop both for the shopowners, the representatives, and in addition the general population that use the shop for the repairing of their vehicles, will be the wellbeing of the shop. Your representatives are going to spend a lot of their day in the shop working, and giving a sheltered situation to them, and also the vehicles that they’re chipping away at, must be absolutely critical to any shop proprietor. A car lift guarantees that autos are securely lifted over the ground, permitting your representatives to work underneath them without apprehension of different issues. Car lifts can make a repair shop much more secure for all who work in or around the shop. Both auto lifts, auto lifts, and different sorts of lifts can be to your best advantage.

Accommodation

The second immense advantage of introducing an auto lift in your repair shop is the accommodation that it will give. Rather than having a narrows in which your representatives stand-in, underneath the floor surface, to take a shot at vehicles the same number of little car repair shops do, the car lift gives you the capacity to remain on the ordinary floor dealing with the auto that is raised. The different auto lifts, auto lifts, and different sorts of lifts you can discover all give accommodation to representatives. This gives a great deal of accommodation to those that are working in your shop and permits them to work from a standing, agreeable position without hopping underneath the auto in a narrows to chip away at it.

Situating

The car lifts are certainly something that can help you to manage the situating issues that numerous auto mechanics face in chipping away at vehicles, since it permits you to raise the vehicle well over the ground level, and work from underneath it from a happy with standing position. This is basically not something that you can manage without a lift, which is going to make taking a shot at a vehicle all the much less demanding.